Einleitung
Werkzeuge
-
-
Loosen the captive screw that secures the module cover to the base cover
-
Using your fingertips, release the tabs on the module cover from the slots on the computer base
-
Lift the module cover off the computer base
-
-
-
Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up
-
Remove the memory module from the memory-module connector.
-
-
-
align the notch in the memory module with the tab in the memory-module connector.
-
Slide the memory module firmly into the slot at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.
-
Replace the module cover
-
Replace the battery
-
To reassemble your device, follow these instructions in reverse order.