Einleitung
Werkzeuge
Ersatzteile
-
-
Remove the four phillips screws that attach the stand to the computer.
-
Tilt the stand up and out.
-
-
-
Slide the hard drive cage out slightly to access and remove the power and SATA cable.
-
Lift the hard drive cage out.
-
-
-
Remove the four screws (two on each side) that attach the hard drive cage to the hard drive.
-
Lift the hard drive cage off the hard drive.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
3 Kommentare
Thanks for this info this is very useful
Thank you once again
Good Job, short and sweet and easy to follow
Really useful information thank you.