Einleitung
Werkzeuge
-
-
Remove the 9 phillips #0 screws from the bottom of the case.
-
Carefully pry open the base cover with your spudger. Work your way around the case slowly, being careful not to damage any of the components inside.
-
Once removed you will have access to the contents of your case.
-
-
-
Locate Memory on the mainboard.
-
Gently push the retention clips away from the memory module. Once you have both clips pushed away the memory module will "pop-up" on it's own.
-
Pull the memory module away from the mainboard.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.