Einleitung
Werkzeuge
Ersatzteile
-
-
Remove the 9 phillips #0 screws from the bottom of the case.
-
Carefully pry open the base cover with your spudger. Work your way around the case slowly, being careful not to damage any of the components inside.
-
Once removed you will have access to the contents of your case.
-
-
-
Locate the solid-state drive.
-
Remove the screw on the right side of the drive.
-
After remove the screw, the drive will "pop-up" to approximately a 45% angle. Pull the drive straight out in accordance with the angle.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.