Einleitung

This guide will show how to add RAM or replace existing RAM on the Latitude D600

  1. IsYMuF4OWAQjjyRd
    • Find the battery

  2. QWcdeEc6oTDFCoii
    QWcdeEc6oTDFCoii
    eaKgnWPSUF5e11HE
    • Pull the tab to release the battery

  3. nZagQA4BHlPagJ1c
    • Pull the battery out

  4. p2ccxgAtltv5ANoI
    p2ccxgAtltv5ANoI
    SymeRoyZxwKtgOAJ
    • Find the panel underneath the microsoft product key sticker, the panel is labeled with an M

    • Unscrew the single screw above the M

  5. yTnIcRQsMKFUawUP
    yTnIcRQsMKFUawUP
    AyKXU24CPtZEy2id
    TLpGSyU5XuGLsq4l
    • Pull off the panel to reveal the RAM

    • RAM is held in by two tabs, pull each tab to the side and the RAM will pop up

  6. enCbQMkhb5SpBRer
    • Once the RAM is popped up, slowly pull it out of the slot

  7. IU5RPLF2SBUIxVsw
    IU5RPLF2SBUIxVsw
    ZSTWJBwxkhcmZBNW
    M3gDWQ4YxroGTTpH
    • To add or replace RAM, place the memory into the slot at an angle

    • Make sure you line it up correctly

    • If it is in correctly it should stay up at an angle by itself

    • Then push down in the middle until it clicks into place

  8. adM1rGB3VXv2MZEZ
    • The RAM should be secured by the tabs where the two semi circles are on the RAM

    • If it is not secure, just gently pull it out and try again, use the images to help you out

Abschluss

To reassemble your device, follow these instructions in reverse order.

Joseph

Mitglied seit: 16/07/14

1446 Reputation

Ein Kommentar

Almost perfect: easy; clear;

Herman -