Einleitung
Werkzeuge
Ersatzteile
- 
                  
                  - 
            After removing the battery, locate and remove the two M3 x 3-mm screws securing the hard drive to the base assembly. Then, slide the hard drive from the base assembly. 
 
- 
            
- 
                  
                  - 
            Next, remove the M3 x 3-mm screw on the hard drive bezel and remove the hard drive bezel. NOTE: Be mindful not to touch the components of the drive. Doing so could damage the drive. 
 
- 
            
                            
                            Abschluss
                          
                          With your replacement hard drive, reassemble your device by performing the instructions above in reverse order.