Einleitung

Prerequisite Only

Werkzeuge

  1. 4ajI5vYBVAH6ILMC
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

  2. sdrbdanRpFGHKRFT
    sdrbdanRpFGHKRFT
    5F2rKqpvlGVLmcpd
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

  3. UyXsu1ZuJjv1TUkc
    UyXsu1ZuJjv1TUkc
    rTYZcUQRXvknXMCK
    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

  4. qrtTFXcwIcUPxNQB
    qrtTFXcwIcUPxNQB
    JSkRFN4H2ly1vi5n
    • Remove the power supply that connects the upper fan to the motherboard. The power supply has black, red, green and yellow wires.

  5. xllhSaC5kJMY5Um5
    xllhSaC5kJMY5Um5
    MyWxw2QPdyMHdPVI
    • Remove the rubber grommets from the base of the fan. A spudger may be useful.

  6. ubG6qPeUvs3je45M
    ubG6qPeUvs3je45M
    LIF2cOVViD5G4HYd
    • Press on the blue release tab and pull the upper fan out of the computer.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Wyatt

Mitglied seit: 06/10/10

763 Reputation

0 Kommentare