Einleitung

This guide shows how to remove and replace a worn battery for the Dell Precision M3800 laptop.

For your safety, discharge your battery below 25% before disassembling your device. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.

  1. 1MR11RxdsQmS5JG4
    1MR11RxdsQmS5JG4
    AvXcqPRkKwjlnLRM
    • Be sure to power off and unplug your device before you begin your repair.

    • Use a T5 Torx screwdriver to unscrew the ten 3mm screws on the laptop back cover.

    • iFixit’s magnetic project mat is great for keeping the screws in one place.

    • Lift up the silver cover from the back panel to reveal two screws.

    • Use a Phillips screwdriver to remove the two screws underneath the silver cover.

    there are 2 additional screws under the metal plate

    Andrew Gaquin -

    That's right, at first time I tried carefully remove the back plate , with no success, {nly few minutes later I realized it were these 2 screws holding it all together and fighting against my intrusive dids

    Alexander Fediushyn -

    Thanks for the tip! I corrected the step to include this.

    Arthur Shi -

  2. okWm2OKpmHvEamd6
    • Use an opening tool to pry around the edges of the back panel to loosen the panel.

    • Remove the back panel.

  3. 4s12xXoGRQsoHT1p
    • Disconnect the battery cable from the system board [1].

    • Use a Phillips screwdriver to remove the four screws securing the battery to the laptop.

    • Lift the battery off the computer [2].

Abschluss

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Johnathan Hammond

Mitglied seit: 28/02/18

44352 Reputation

0 Kommentare