Einleitung

Use this guide to replace the headphone jack on your Dell Streak 7. This guide will show you how to remove the old headphone jack.

  1. kFcdKPEWWRdiOO3r
    • Insert the spudger under the capacitive button panel, and slide the spudger all the way around.

    • You will want to heat up the screen edges with the iOpener to help facilitate removal.

  2. EaZiL3JUshRwMtgs
    • Remove the button cover by lifting the cover away from the tablet.

  3. pkowHHwCYCSKf5Hi
    • Using the Torx screwdriver, remove the 4mm screws.

  4. JKHo6SERDvTjPhZL
    • With the Torx screwdriver, remove the two 5mm screws.

  5. 6yuhOpNFnaodJgAP
    6yuhOpNFnaodJgAP
    YNZJdUNEAPTn3jVV
    • Using the spudger, insert it under the black side panel. Slide the spudger all the way around until the cover piece comes off.

    • With the Torx screwdriver, remove the two 4mm screws.

  6. e4bnjAZGaNLIXbT2
    • Use the spudger to go along the edges of the device and pop out the latches securing the display to the case.

  7. rpHEXxdsVmYOIBPs
    rpHEXxdsVmYOIBPs
    ePCqhlNvRgmjaale
    • Ribbon cables are very sensitive and prone to breaking

    • Disconnect the ribbon cables by unlocking the connector and pulling the cable out slowly.

    • Make sure all the cables are unplugged before opening the device completely. Failure to do so might lead to broken or torn cables.

  8. IrDAVZwqiT2Mq2au
    • Using the spudger, disconnect the ribbon cable by lifting up on the connector.

    • Ribbon cables are fragile and easily broken.

  9. JUtYNPOPYF2eoAMl
    JUtYNPOPYF2eoAMl
    BjyqamLdE3kv1aEP
    • Pull the headphone jack up, away from the case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ali Benjelloun

Mitglied seit: 03/10/16

376 Reputation

0 Kommentare