Dell Studio 1737 Keyboard Replacement

Geschrieben von: Joseph Jacavone
  • Kommentare: 0
Dell Studio 1737 Keyboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

20 Minuten

Einleitung

This guide will demonstrate how to remove or replace the keyboard of a Dell Studio 1737 laptop.

  1. KavKbrs2lbBK3LTS
    KavKbrs2lbBK3LTS
    CcqoHDy3vXCA3UPy

    • Slide the battery release slider all the way to the right and push the battery straight out of the back of the computer

  2. OgunvYx2Upi12hq2

    • Use a plastic opening tool to detach the internal clips (marked with red boxes in photo) and release the small plastic panel above the keyboard

    • This panel doesn't come off just yet, this step is just to make it easier when it comes time to remove it

  3. JktnWdhGwOQMTC5X

    • Remove the 4mm ph1 screw under the battery

  4. juUEDBMQ5BWDVC6Y
    juUEDBMQ5BWDVC6Y
    xCDq5p3Li2BYYchT
    mnXBcADoThdLq1Yh

    • Pry black panel away from laptop body starting at the base of the screen

    • Be careful when flipping the panel over, as the panel is still attached by the fragile ribbon cable

    • Flip the panel over onto the keyboard

    • Detach the ribbon cable from the motherboard as shown

  5. WDLCo6SeF5YjWc5R

    • Starting at the top where you just removed the black panel, pry the black bezel away from the outside of the keyboard

  6. NWOKHADXHUlwWBOp
    NWOKHADXHUlwWBOp
    BqIlnyZWaMYiAyfN

    • Use a small screwdriver to take out the 4 4mm ph1 screws along the top of the keyboard

    • Lift from the top of the keyboard and flip it over onto the palmrest

    • Again, be very careful of the ribbon cable attaching it, as these are easily damaged

  7. pLNEVRlWO1aXZOBE
    pLNEVRlWO1aXZOBE
    EupoA4Q5FZclnSNC

    • Remove the ribbon cable as shown

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Joseph Jacavone

Mitglied seit: 10/03/17

743 Reputation

0 Kommentare