Dell VRP100 Cover Replacement

Geschrieben von: Marco Salazar
  • Kommentare: 4
Dell VRP100 Cover Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

10 Minuten

Einleitung

This replacement guide will show you how to replace the cover panel on your Dell VRP100 headset. With the right tools, this replacement is very simple, and is the basis to replacing many more components of your headset.

  1. YNXjLFGrCPbffdOJ
    YNXjLFGrCPbffdOJ
    IeXtAMNY26WttYYN
    hnXawvmUY6vKH2FM

    • Remove the black foam padding by peeling away slowly.

    • Remove the front and back padding from the headset by peeling away slowly.

    Parallel structure

    Andres Ikaika Elzaurdia -

  2. wQGMnqkj1sDDJQM2

    • Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.

    • Cover panel may need to be pushed in before inserting screws.

  3. 6osulcooBfOyRFWr
    6osulcooBfOyRFWr
    ylmgLIvKIw2XYaBD
    T5kdWDWNUXGYnNoU

    • Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.

    Break one bullet into two

    Andres Ikaika Elzaurdia -

  4. wfd34mshg5DdTjSR
    wfd34mshg5DdTjSR
    Nrm6H1s1iNxPMHTO
    HBPBZOnu4SnRBpQ1

    • Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.

    • Carefully remove the lens and motherboard assembly from the white casing.

    add ‘How’ to second bullet point.

    Andres Ikaika Elzaurdia -

    The “carefully” part should be moved so that the sentence starts with a verb

    Clayton Lipping -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Marco Salazar

Mitglied seit: 08/10/18

375 Reputation

0 Kommentare