Einleitung

  1. 4pYJnF36iVifUALY
    • Slide the release latch to release the battery [1].

    • Remove the battery from the computer [2].

  2. ZX4OPqwLUDfHOQ2P
    • Remove the M2L3 screw that secures the optical drive to the computer [1].

    • Using a plastic scribe, push the tab in the direction of the arrow indicated on the chassis. [2].

    • Slide the optical drive out of the computer [3].

  3. ZvErYEj1FjTVnnwh
    • Using a plastic scribe, release the five tabs from the slots located above the keyboard [1].

    • Flip the keyboard on the palm rest to access the keyboard connector cable under the keyboard [2].

  4. kVZZhLRnMxEExZgW
    • Disconnect the keyboard cable from the system board.

    • Remove the keyboard from the computer.

  5. vhuXJrKRKRkUTaAc
    • Disconnect the optical drive connector and lift it to remove it from the system board [1].

    • Remove the M2L5 screws that secure the base cover [2].

    I can’t remove that screws

    south movie tadka -

  6. TjWggrPbXrQyfmG1
    • Flip the computer and remove the screws (8 screws - M2.5L8; 3 screws - M2L2; 2 screws- M2L2) that secure the base cover to the computer.

  7. akICLAkonaxkF12J
    • Use a scribe to pry the edges of the base cover [1].

    • Lift the base cover and remove it from the computer [2].

  8. PTaofMBkUExngTTN
    • Disconnect the hard drive cable from the connector on the system board [1].

    • Remove the M2L3 screws that secure the hard drive assembly to the computer [2].

    • Lift the hard drive assembly away from the computer [3].

Abschluss

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Mitglied seit: 28/02/18

44352 Reputation

0 Kommentare