Einleitung

This is a prerequisite guide on how to remove the back cover and the battery of the Dell Vostro V13. It will allow you to work on the laptop safely. Also be sure to power down, unplug and back up your laptop in order to prevent injury and data loss.

  1. srpZPYZlRAo3p6J2
    srpZPYZlRAo3p6J2
    CC3dnBMlda6M6xEi
    MC5IOHMEMfCEaHJU
    • Back up the memory to an external drive and power off the laptop before starting.

    • Flip the laptop over so the vents are facing you.

    • Remove the six 5.0 mm Phillips #1 screws using the magnetic driver.

    • Remove the two 5.0 mm Phillips #1 screws on the back side of the laptop.

  2. OBwugeXpwrmO4WOr
    OBwugeXpwrmO4WOr
    BHFbyYIAFEHwcaUW
    dRShHAsulbbdcmrg
    • Slide out the SD and MicroSD holders.

    • If you are having trouble sliding them out, use the plastic opening tool.

  3. MubFwfvO1b15xSFk
    MubFwfvO1b15xSFk
    qehACBFkdcVHER5L
    wmktbnnKWdMqdBax
    • Slide the plastic opening tool around the perimeter of the laptop until the cover pops off.

    • Pull the back cover off.

  4. TmWXmW3RcFaIGDJ2
    TmWXmW3RcFaIGDJ2
    1ZVZkvnXpASCmNq5
    • Remove the three black 3.9 mm Phillips #1 screws holding the battery in place.

  5. Dsoup6R2alr3GFTd
    Dsoup6R2alr3GFTd
    IPIaEQnQIBBd1fVS
    6ZZPRGoCuUUrgXOi
    • Flip up the clip of the ribbon connector.

    • Pull the strip out to disconnect the battery.

  6. shckkUBNyBGmTlpl
    shckkUBNyBGmTlpl
    RX2iOYgFLUjfELTM
    • Remove the battery.

    • Removing the battery allows you to work safely.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Patrick Swaney

Mitglied seit: 16/01/19

363 Reputation

0 Kommentare