Einleitung

This is a prerequisite guide! This guide is part of another procedure and isn't meant to be used alone.

Disconnect your battery cable in one easy step with this guide.

  1. TpIA2FFg24uBChBn
    TpIA2FFg24uBChBn
    a1R1dETf4GDWHuua
    • For your safety, discharge the battery below 25% and power down your device before disassembly.

    • Use a Torx T5 screwdriver to remove the eight 3.2 mm-long screws.

  2. PUQ6NCHjVWcFWYLC
    PUQ6NCHjVWcFWYLC
    5Q3yfSPhtWHWLiQe
    • At each corner, insert an opening pick between the back cover and the device body.

    • Pry upward to release the retaining clips. Listen for a loud click when each clip releases.

  3. rP6Tf2fvQSFLebHf
    rP6Tf2fvQSFLebHf
    IjcasfkFPqndIuuO
    1LWANk6PCDOLJwpi
    • The edges of the cover are very sharp. Use caution when handling this panel.

    • Lift the front edge of the cover away from you.

    • Some clips may release during this step. If the cover is stuck, move it side to side to help release additional clips.

    • Remove the back cover from the laptop.

  4. fkkDoQcAxlWTGevo
    fkkDoQcAxlWTGevo
    4YCHmBJt2EfxlXDj
    5wpXjjINOxwDWQpL
    • Push the battery connector out of its socket using the pointed end of a spudger.

    • Push the small tabs on the side of the connector to avoid damaging the cables.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Clay Eickemeyer

Mitglied seit: 19/09/22

23447 Reputation

0 Kommentare