Einleitung

Removal of the battery will be covered in this guide. Be careful disconnecting cables as to not break them or their connectors.

For your safety, discharge your battery below 25% before disassembling your device. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.

  1. OCKKQnxJUK4QOffV
    OCKKQnxJUK4QOffV
    ZBnHG4oMjB3wgYrM
    dfwHLssScTWl2jFW
    • Using a T5 Torx screwdriver, remove ten 3mm screws.

  2. JwCduHmTBvhwZEdn
    JwCduHmTBvhwZEdn
    Cej3jSuA4E6ED2Am
    • Lift the plastic tab.

    • Remove two 3mm Phillips #0 screws under the plastic tab.

  3. bePuNqxfGJxJejU6
    • Lift the lower case off.

  4. PKVBPtGLcxvjvCu2
    PKVBPtGLcxvjvCu2
    Qf1dDcUe4yvsOeP2
    • Using a Phillips #0 screwdriver, remove the seven 3.5mm screws that secure the battery to the palm rest assembly.

  5. AcMoTBCh2BCu2GPE
    • Disconnect the battery cable from the system board.

    • Be sure to use a plastic tool, not a metal one.

  6. 6nuYkBdRPoEcQXXc
    • Lift the battery off the chassis.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Larissa Omura

Mitglied seit: 05/04/19

743 Reputation

0 Kommentare