Dell XPS 18 Internal Cover

Geschrieben von: Austin Weir
  • Kommentare: 1
Dell XPS 18 Internal Cover

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

10 Minuten

Einleitung

This guide is used as a prerequisite for replacing internal parts in the Dell XPS 18

  1. stUOnfnBUE6YN5x3

    • Turn the device on its screen.

    • Remove the ten 4mm screws using a T8 Torx screwdriver.

  2. EsppVhHdF4hHa6VF

    • Gently flip out support feet located near the bottom of device.

  3. P4B3cAjtRTeQ3VGb

    • Gently lift the back cover off the device. The back cover should come off easily.

  4. fTSYpVFuLmSxyUJ2

    • Use the opening tool's angled edge to lift the clasps securing the screen and motherboard cables.

    It’s not necessary to remove the cables. Unclip the white touch cable from the touch board as shown in step 8, then remove the two screws holding the board to the frame, as shown in step 9. The board can then be moved out of the way to lay flat on your work surface without having to disconnect all the cables. Doing this eliminates this step and step 5. The order of operations then would be steps 1-3, 8, 9, 6, 7, and 10.

    Strephon Alkhalikoi -

  5. EcLqseYCFmwLRLHk
    EcLqseYCFmwLRLHk
    wLFDJOfY12MWvWsw

    • Disconnect the screen and copper colored motherboard cables and tuck them under the device to prevent future hassle.

  6. VyMmSRqHgi3wosxM
    VyMmSRqHgi3wosxM
    TVOQHvYIomKaPFYU

    • Remove the two black 3mm screws from the internal cover with a Phillips 00 screwdriver.

    • Remove the internal cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Austin Weir

Mitglied seit: 31/01/15

1263 Reputation

0 Kommentare