Einleitung
Before you begin the LCD Screen Display replacement process, be sure to ground yourself. Grounding yourself prevents short circuiting the device, and/or shocking yourself. An easy way to do so would be to remove one of your shoes.
Werkzeuge
-
-
Remove the plastic trim at the base of the screen screen. Start from the tab on the right side and work to the left side.
-
-
-
Lift the keyboard about 2 inches up from the laptop platform.
-
From this angle the keyboard ribbon connector can be seen and disconnected.
-
-
-
Remove 2 M2x3mm screws that are located at the bottom of the plastic bezel with a PH0 screwdriver.
-
-
-
Use iFixit plastic tool and a cutout of cardboard to pry out the plastic bezel around the edges of the LCD screen
-
To reassemble your device, follow these instructions in reverse order.