Einleitung
Prerequisite only! Use this guide to remove or replace the plastic manifold cover in a Dewalt DWFP55126 Air Compressor.
The manifold cover screw is deeply recessed and requires a T10 driver with a long shank in order to reach.
Make sure to completely depressurize the air compressor tank before performing any repairs.
Werkzeuge
Ersatzteile
-
-
Use a long-shank T10 driver to remove the manifold cover screw.
-
Lift the cover directly up off of the gauges to remove.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
