Dexcom G6 Receiver Battery Replacement

Geschrieben von: Andrew S
  • Kommentare: 5
Dexcom G6 Receiver Battery Replacement

Schwierigkeitsgrad

Difficult

Schritte

10

Zeitaufwand

Keine Schätzung

Einleitung

  1. TQH5hba2OEb12Eyu

    • Unscrew the 6 Torx T5 screws from the back of the device

  2. ZVDEtYgaK1YcrEWJ
    ZVDEtYgaK1YcrEWJ
    t5XDOntxkxoC1n5u

    • Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.

    • Screen Information: Model AM0310R-04 Lot # NHT18080052

    Thank you! Where can we buy the screen?

    Enrique -

    I didn't get any of the details on the screen when I tore it down, I will try to get the information from the original display when I can.

    Andrew S -

    Have you found any info on getting a replacement Screen? Some company must make theses

    Jim Beamed -

    Yes, this would be great to know. I can't afford to replace this a 4th for my Daughter, but I while heartedly believe in right to repair!!

    Rafael Rasillo -

    I'm not sure if you can find the displays anywhere. The only number (presumably model number) I could find on the screen was AM0310R-04 and the Lot Number NHT18080052.

    Andrew S -

  3. VNBxiKf5nKlulWJe

    • Using a spudger, unplug the Charging Port connector from the motherboard.

  4. gjHfRaCQiEnLAicj

    • Remove the 2 silver Torx T5 screws holding the charging port down.

  5. TlZyLyTpCvvFC6Fl

    • Remove the Charging Port Assembly from the motherboard.

  6. epTZCXX2LeJlmtjs

    • Remove the silver Torx T5 screw holding the motherboard down.

  7. ORXKXc6ySba4pyNO
    ORXKXc6ySba4pyNO
    AcG5QONQeFqP6oHw

    • Using a spudger, carefully remove the battery connector on the left side of the motherboard.

  8. JbcWmZHiiCbSypOR

    • Using a spudger, carefully pry up the motherboard to remove it.

  9. JEEsK4hjPBMHRHhs
    JEEsK4hjPBMHRHhs
    Rk1516LeKuvnxqVl
    Vxa4G1AwotThM6s2

    • Use heat to soften the adhesive holding the battery down.

    • Carefully use one or more opening picks to remove the adhesive holding the battery down, then remove the battery.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Andrew S

Mitglied seit: 30/07/21

13837 Reputation

0 Kommentare