Digiland 10.1'' DL1016 Motherboard Replacement

Geschrieben von: Virginia Tapia
  • Kommentare: 0
Digiland 10.1'' DL1016 Motherboard Replacement

Schwierigkeitsgrad

Difficult

Schritte

7

Zeitaufwand

40 Minuten

Einleitung

  1. OiyJifSDeTsJQt1A
    OiyJifSDeTsJQt1A
    CgUESqqJ3nSKZvUv

    • Use an opening pick and an opening tool to pry the backing off the back of the tablet.

    • You may need some force when doing this and if needed use a metal spudger.

  2. fD23HCADMRFHCNHD
    fD23HCADMRFHCNHD
    abt6QZGSIRqVCgMk

    • Gently lift the backing off.

  3. brAVONSnhnNSWiGJ
    brAVONSnhnNSWiGJ
    MTNCsyrXNdvkYTVg
    TWa3VdfDKK5F1DZp

    • Pull back the black flaps on the ZIF cable connectors.

    • Pull the ribbon cables out of the connectors.

  4. eAhjLwZgFDCMnkIP
    eAhjLwZgFDCMnkIP
    O6XCywyPO6UhHQHB

    • Gently pull the wiring back.

    • You may need to use a metal spudger to lift the wire connector off the back of the screen.

  5. NNZLBCkFN1SBeesF

    • Disconnect the black cable off the motherboard.

    • Remove the four 1.5mm Phillips #000 screws from the motherboard.

  6. hffxQkvGlfPPHYqu
    hffxQkvGlfPPHYqu
    ip2LXpO5txhgWeon

    • Make sure the ribbon cables are free or unconnected so the motherboard is able to be moved.

    • Use a metal spudger to slide underneath the motherboard and push it up so it's unstuck from the tablet.

    • Lift up the motherboard and place it somewhere that is clean and kept safe.

  7. 1OQUwTTTukAYIGtQ

    • Once you have followed all steps simply replace the motherboard to fix your RAM

Abschluss

To reassemble your device, follow these instructions in reverse order. When following the Prerequisite Guide for Replacing the Power Button ONLY go to step 7.

Tinte & Feder

Virginia Tapia

Mitglied seit: 26/08/19

386 Reputation

0 Kommentare