Einleitung
Dim or black out the annoying blue LED on a Hesh 2 Wireless headset.
Werkzeuge
-
-
On the right speaker, remove the 4 screws shown.
-
Remove the plastic plate , but be careful not to damage the speaker wires.
-
-
-
On the bottom left of the board, near the power button, are LED0 through LED3. The odd numbered LEDs are blue, and the even numbered LEDs are red.
-
With the sharpie, carefully mark the tops of the LEDs. Alternatively, if you want to black out the lights entirely, use very small pieces of electrical tape to cover them.
-
To reassemble your device, follow these instructions in reverse order.
2 Kommentare
I just put a drop of nail polish in each led. i use deep red. with that color you still have let signal for on/off and low bat.
Buenas tardes mi problema con mis audífonos es que ya no prenden debido a una caída,lo cual se me hace raro ya que al querer prenderlos solo parpadean los led pero ya no se escucha el encendido...
Gracias espero tener respuesta