Dirt Devil Vibe Vacuum Brush Roller Replacement

Geschrieben von: Michell Lopez
  • Kommentare: 0
Dirt Devil Vibe Vacuum Brush Roller Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

10 Minuten

Einleitung

Use this guide to replace the brush roller on your Dirt Devil Vibe vacuum when the brush on your vacuum stops spinning or spins too slowly. You will need a #0 phillips-head screwdriver to complete this replacement. Make sure the vacuum is unplugged before starting the replacement process for safety purposes. Make sure to keep track of all screws that will be removed during the replacement process.

  1. m44WcARr3L1KiSsM
    m44WcARr3L1KiSsM
    2j1XQ1ofc2RiCERV

    • Lay the vacuum so it's facing up.

  2. NXLvqsAecWWUfHfT

    • Use a Phillips #0 screwdriver to remove each screw.

  3. XpC2nbUiFLZlYWM6
    XpC2nbUiFLZlYWM6
    4V24OEwgmqMMB5eD
    Zcj4gTgaJTXsmQhj

    • After removing all of the screws pull the vacuum's black cover up to remove it.

  4. uNY3dBMDhCQHDN6j
    uNY3dBMDhCQHDN6j
    l4gmnNAmqj4pQQry

    • Pull the brush roll up to remove from the black cover.

  5. 1YaQMpAnhMrVUqOI

    • Replace the brush roll with a new brush roll.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Michell Lopez

Mitglied seit: 09/10/19

121 Reputation

0 Kommentare