Disassemble Proctor Silex® 2-Slice Extra Wide Slot Toaster Body

Geschrieben von: Carlos
  • Kommentare: 3
Disassemble Proctor Silex® 2-Slice Extra Wide Slot Toaster Body

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

Keine Schätzung

Einleitung

Disassembly

1. Flip toaster over.

2. Locate four phillips screws on the bottom of the toaster.

3. Loosen and remove.

4. Sides will pop out once screws are removed.

  1. iAxSYDK2ccAD5sRF

    • 1. Flip toaster over.

  2. 5mbClCL4GrycMZ1N

    • 2. Locate four phillips screws on the bottom of the toaster.

  3. jIHyMrH6JLvGWAXl

    • 3. Loosen and remove using a Phillips head screwdriver

  4. OPiDgCnuUvIbdDb4

    • 4. Sides will pop out once screws are removed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Carlos

Mitglied seit: 24/07/13

113 Reputation

3 Kommentare

Hi Carlos,

Before removing the cover I need to remove the PUSH LEVER.

Please forward instructions on HOW TO REMOVE THE PUSH LEVER.

Thank you.

Earle

earleb -

I Disassembled, cleaned and put it back together.  However the purpose of the exercise was to fix the browning feature or timing issue.  the little plastic bit that goes from the browning turn knob does not function.  So the push knob does not stay down.  This results in having to hold the push knob down till the toast is done to my satisfaction.  The little plastic bit does not connect properly to the PCB or whatever else it is connected to, and so the push knob on the side of the toaster does not stay down.. Allan

Allan Rodrigues -

To slide down the toast, the lever does not go down completely, leaving the top of bread exposed. Is there a way to adjust the depth the toast goes down? If so, could you send me instructions. Thank you

Christina -