Disassembling ASUS MeMO Pad 7 (ME572C) Rear Panel

Geschrieben von: Efe Guldogan

Kommentare: 5

Disassembling ASUS MeMO Pad 7 (ME572C) Rear Panel

Schwierigkeitsgrad

Easy

Schritte

Zeitaufwand

1 - 3 Minuten

Einleitung

This guide will show you how to disassemble the rear panel for a Asus MeMO Pad 7. This is the very first part to start to access all the parts on your tablet. You can remove the rear panel to check the parts and do the replacement guides of the tablet.

Werkzeuge

iFixit Opening Tool

Schritt 1

Make sure your device is turned off. Then with a plastic opening tool, carefully remove the back panel by carefully working your way around the perimeter.
The panel will be glued on and requires pressure to open.

Schritt 2

After removing the rear panel, use a plastic openning tool to remove the frame of the tablet.
Start in the middle of the top side and insert a plastic opening tool between the screen and the frame.
Carefully run the plastic opening tool along all the edges of the tablet.

Schritt 3

When you take the rear panel and the frame out, place the rear panel and the frame away from the device.

You do not need to separately remove the back and the frame. You can do it in 1 step if you start around the screen and remove the frame and back together.

Visegradi Istvan - 22/12/18

Where can I find rear panel please help?

Simeon Tembo - 15/09/19

Exact, on peut déposer le volet arrière en 1 seul fois. Commencer sans outil, juste avec les mains en forçant légèrement sur un angle inférieur (droit ou gauche peut importe) afin de déboîter un premier clips-plastic. Puis avec un outil fin en plastique (pas de métal de préférence !) faire le tour de l’écran afin de déboîter tous les clips-plastic. Merci pour ce post.

Loïc MALECOT - 28/03/20

To keep the frame notches intact, pry the frame first sideways, then to the back, lifting the outside notches of the frame over the inside notches of the device.

My rear panel seems welded together with the frame, so came off as a whole. I noticed 8 inside/device notches of the total 4x6 notches broke in the process.

Before disassemble, I noticed in the middle on the longer side, next to the power button, already a gap, through which I saw the copper shining of the sidekeys part. Maybe because of temperature expansion or strain of the elastic corner clips of the sleeve I used.

Eduard - 04/08/20

Correction: “To keep the frame notches .. device.” = “Notches on the plastic motherboardchassis are snapped over notches of the outside frame locking both together. To keep the chassis notches intact, .. chassis.“

Eduard - 06/08/20