Einleitung

  1. mCvDEGwFJRx5RdRb
    mCvDEGwFJRx5RdRb
    32pDrBZpwZnTxgWN
    IuthjmuKNV61CtRw
    • Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles.

    • Unscrew the 2 4 mm Phillips head screws by the battery.

  2. hZXL1lyd5d4XFhMR
    • Remove the panel above the keyboard with a plastic spudger.

  3. drjKX1pFbqYtLJ6Q
    • Once the panel is removed, use the spudger to pry out the keyboard.

    • Do not fully remove, for the keyboard is still attached to the ribbon cable.

  4. t5n2tsEQrQL35GWV
    t5n2tsEQrQL35GWV
    X4uVGFUy5fdQoTuY
    • Detach the ribbon cable from the keyboard by pulling the end of the ribbon cable that is attached inside of the laptop.

    • Be sure to detach from the root rather than from near the middle. It should slide out with ease.

    • Now you can fully remove the keyboard from the laptop.

  5. ka6EGEZ2MHrIXUHb
    • Place your fingers or a spudger between the front panel and the rest of the laptop.

    • Pull upwards gently to detach the side you are grabbing.

    • Repeat on the other side until the panel easily peels off the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Nolan Schock

Mitglied seit: 14/04/14

501 Reputation

0 Kommentare