Disassembling Black and Decker Pivot Plus PD600 Drill

Geschrieben von: Jonathon Centofranchi
  • Kommentare: 1
Disassembling Black and Decker Pivot Plus PD600 Drill

Schwierigkeitsgrad

Easy

Schritte

2

Zeitaufwand

5 - 10 Minuten

Einleitung

This guide will show you how to open your drill so that you can fix any problems that require you to open it up and possibly remove or replace parts. This guide is prerequisite only.

  1. Qn63OQtSBsiNrIUD
    Qn63OQtSBsiNrIUD
    TkOvaFM4aJqKHTt1
    JA5EBGlrTPNt2uJK

    • Remove the nine 15mm Philips #1 screws

    • Remove the two 12.5mm Philips #1 screws

    • Remove the two 10mm Philips #1 screws

  2. ywUMC1Oec2eIb1w3

    • Lift one side of the drill casing off of the drill. Note that the drill casing consists of two pieces on either side of the drill.

    Dónde llevan los bujes de la a parte que van los engranes

    Rigoberto Silva -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jonathon Centofranchi

Mitglied seit: 19/04/13

300 Reputation

0 Kommentare