Disassembling Brother PT-D200 Back of Device

Geschrieben von: [deleted]
  • Kommentare: 0
Disassembling Brother PT-D200 Back of Device

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

Keine Schätzung

Einleitung

  1. qQOTWnCVigvZBqFW

    • Flip the device over and press down on the indication arrows located at the top center of the back cover and pull it open.

  2. SOfK1tDoqtUHHZuT

    • Remove the six AAA batteries.

  3. ZrMw1CYx5WI1pDT2

    • Use the Helping Hand 1/4" screwdriver to unscrew the six 3/16" corner screws.

  4. PSUZGkysoVixXjUQ

    • Close the back cover and then flip the device over and separate the top half from the bottom half as shown.

    • Be gentle when lifting the top of the device, there is a ribbon cable attaching the two halves together.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

[deleted]

Mitglied seit: 24/01/14

301 Reputation

0 Kommentare