Disassembling Canon PowerShot SD800 IS Back Cover

Geschrieben von: Jeremy Rabaino
  • Kommentare: 0
Disassembling Canon PowerShot SD800 IS Back Cover

Schwierigkeitsgrad

Very easy

Schritte

4

Zeitaufwand

2 - 3 Minuten

Einleitung

Removing the back cover allows access to the LCD display and the flash assembly.

  1. P5Ym2yF2EdkHTkZQ

    • Remove one 2.25mm screw on the bottom.

  2. F4NsiYhWwUZoGcrV

    • Remove two 2.25mm screws on the right side looking from the front.

  3. arUk4uYptBuACm4x

    • Remove one 4.7mm screw on the side with the AV output.

  4. TgjXlNeHBJdUFUOR

    • Pull off the back cover.

    • The back cover tends to stick in the top corner (near the mode dial) due to a metal clip. Jiggle the cover side to side as you pull it out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jeremy Rabaino

Mitglied seit: 10/10/10

135 Reputation

0 Kommentare