Disassembling Dell OptiPlex FX170 Case

Geschrieben von: Frank Pecka
  • Kommentare: 0
Disassembling Dell OptiPlex FX170 Case

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 - 10 Minuten

Einleitung

Prerequisite Only

  1. eKB1Pr3Xoi1kBLyD

    • With the base stand facing upwards, unscrew the 6mm Phillips #2 screw.

    • Pull the base stand straight up from the device.

  2. Ksrjub4PqrM2QNiJ
    Ksrjub4PqrM2QNiJ
    52ZEPDdcKgJVmZSV

    • Unscrew and remove the eight 4mm Phillips #0 screws (four on top, four on bottom) from the top and bottom of the device.

  3. vkj3jdWuKuYi2TLI
    vkj3jdWuKuYi2TLI
    nCSSIqVcCgMCZIMT
    aBSF16YNTQrKUI42

    • Run the flat side of the spudger along the entire line of the case starting from the back where the power plug and a small screw are located.

    • Use care to not apply excessive force that could damage retaining clips while running the spudger along the case.

  4. XHCtTYmDgHUWhr4X
    XHCtTYmDgHUWhr4X
    rIyPRqLIrCjcDH4S

    • Once the clips have been released, gently disengage the cover from the rest of case by pulling in opposite directions.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Frank Pecka

Mitglied seit: 14/01/15

340 Reputation

0 Kommentare