Disassembling HP Pavilion g7-2275dx Back Panel

Geschrieben von: John Sutton

Kommentare: 1

Disassembling HP Pavilion g7-2275dx Back Panel

Schwierigkeitsgrad

Moderate

Schritte

Zeitaufwand

1 Minute

Einleitung

In order to replace the RAM, hard drive, or wireless card in the laptop you must first remove the back panel, as shown in this guide.

Werkzeuge

Phillips #1 Screwdriver

Schritt 1

Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.
Flip your device over so the bottom panel is facing up.

There is no realistic risk of electric shock on a laptop. However, is it still advisable to disconnect power plug and battery before opening as there is a real risk of accidental damage by short-circuit.

antoniotavares - 29/07/20

Schritt 2

The battery is held in by a latch in the front and tabs in the back.
Slide the lock switch left, towards the center of the computer.
Lift up the battery, rotating it up and away from you, then pull it out.
To put the battery back in, line it up with the battery bay and the holes for the tabs. Then let the battery rotate towards you and press down until the latch engages and you hear a click.

Schritt 3

Unscrew one Phillips #1 screw from the back panel.
The screw is on a spring and attached to the panel. It will pop up, but will not separate from the back panel.