Disassembling Honeywell HY-254-TGT Plastic Assembly

Geschrieben von: Daniel Anderson
  • Kommentare: 1
Disassembling Honeywell HY-254-TGT Plastic Assembly

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 Minuten

Einleitung

Follow this guide to properly open the fan to perform other repairs or replacements. We recommend another person providing assistance. The tower is quite large and can be difficult to manage by yourself.

  1. gWwYC4FGFIJqXdsi

    • Remove the two 3/4" wing screws on the bottom of the fan by rotating them counter-clockwise.

  2. VUsSIphKkAHYZU5U
    VUsSIphKkAHYZU5U
    kqp6JPDHv4FesEt4
    NVV5MBGRVB6qFLqk

    • Twist the fan base counter-clockwise until the pins line up as shown.

    • Pull the base straight towards you to remove it, feeding the wire through the base.

  3. wcxncFF3gFce4Ass

    • Remove all of the marked 1/2" Phillips #02 screws on the backside of the fan

    • Remove the two marked 3/4" Phillips #02 screws in the middle.

  4. FN3wRqlY2avBcXbF
    FN3wRqlY2avBcXbF
    1UPuuxNptuwb5XR5
    ZGMmdgduMqvLcjKr

    • Use a plastic opening tool or screwdriver to pry off the back of the fan, starting from the top down.

    • Be aware of two clips inside the fan, towards the bottom third of the fan. If the back appears stuck on certain spots, push inward edges of the front casing around the problematic area.

    Please advise how I can order the part which locating on bottom of motor mount bracket. The white colour bracket for fan body diretion rotorying aid. The part as show on picture on left hand side holding. Thanks.

    jamescpleung -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Daniel Anderson

Mitglied seit: 01/10/15

194 Reputation

0 Kommentare