Disassembling Kinivo ZX100 Mini Portable Speaker

Geschrieben von: Laura Dion
  • Kommentare: 0
Disassembling Kinivo ZX100 Mini Portable Speaker

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

15 Minuten

Einleitung

Prerequisite only.

  1. AxZrlWNpP3aVPZjr

    • Open the circular portion at the top of the speaker by twisting it until it reaches the maximum possible height.

    • Make sure it is twisted fully, as this will allow access to four screws to be removed in the next step.

  2. MUjFOI2JNMAHmLwF
    MUjFOI2JNMAHmLwF
    OwyrbMvrEnYAGYUN

    • Remove the four 12 mm Phillips screws from the enclosure.

  3. Xf5MSMVxkAtLMPmX
    Xf5MSMVxkAtLMPmX
    VixjvT3vvlDJEFgm

    • Separate the resonator portion from the base of device to reveal the middle separator of the enclosure. The enclosure will now be in two pieces.

    • Hold the resonator portion of the enclosure gently aside to make sure there is no tension on the black and red wires coming from the bottom portion of the device.

    • Excessive force may disconnect the black and red speaker wires from the circuitry in the bottom portion of the device.

  4. XFpHnLxxK2vrCdia

    • Separate the very bottom portion of the enclosure (marked in red) by pulling vertically on the red portion of the enclosure (marked in orange).

    • Gently set the very bottom portion and the resonator section aside once they have both been separated.

    • Remove the circuit board with your hands by lifting and sliding the board away from the LED indicator.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Laura Dion

Mitglied seit: 27/03/15

143 Reputation

0 Kommentare