Einleitung
Werkzeuge
-
-
First be sure to turn the power switch to the off position.
-
Do this by turning the leftmost knob counter-clockwise as until the line points to "off."
-
-
-
Now remove the battery.
-
On the back of the device locate the battery cover.
-
Remove it by pushing down on the clip.
-
Then pull the piece of fabric until the battery comes out.
-
-
-
Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.
-
-
-
Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.
-
-
-
Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer.
-
-
-
Grab the headphone jack from inside the case and pull it toward the speaker until you can fully remove it from the device.
-
To reassemble your device, follow these instructions in reverse order.
Ein Kommentar
There Is a toroidal transformer inside ?
To turn the device off, turn the rightmost knob counterclockwise, not the leftmost one (which controls the volume).
Célestin Taramarcaz -