Disassembling Microtek ScanMaker 5900 Device Lid

Geschrieben von: Taylor Nesheim
  • Kommentare: 0
Disassembling Microtek ScanMaker 5900 Device Lid

Schwierigkeitsgrad

Easy

Schritte

2

Zeitaufwand

2 - 3 Minuten

Einleitung

This guide aims to teach the owner of a Microtek Scanmaker 5900 how to remove the lid of the device.

  1. ZKKD2ODgdNE6ycPL
    ZKKD2ODgdNE6ycPL
    b3GsvWC5ZEMIYNKA
    kbNJVPUgVaKWgf3t

    • Loosen the screws on the serial port by turning them counter clockwise by hand.

    • After loosening the screws, pull the serial port out.

  2. dkFDbiKh1FEcQKJK
    dkFDbiKh1FEcQKJK
    n3WnQouIh6cnqyS2
    EnTuXlHFPdBOoHty

    • Lift lid to its vertical position.

    • Pull lid straight up to remove it from the scanner.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Taylor Nesheim

Mitglied seit: 12/10/11

59 Reputation

0 Kommentare