Einleitung

Today we are going to take you to a step by step guide on how to install a new keypad.

  1. B3sbjw4XfDPB3fU4
    B3sbjw4XfDPB3fU4
    soyvh4SFRYTJJmbX
    kQokZdYQqTCIV3sO
    • Slide the notch downward while pulling the back cover off to remove it.

  2. FYQZGnC5CVIoEHJY
    FYQZGnC5CVIoEHJY
    5tOoqOlfKhhmNMCJ
    axvZcFdMFsZUOPlQ
    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

  3. hwGeEUCq1SWp1PFO
    hwGeEUCq1SWp1PFO
    AMsWkdq2vRbA1xhc
    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

  4. xmdGvJIgVFcl1lHQ
    xmdGvJIgVFcl1lHQ
    cZj4KhT3A2YCeT2m
    vC3nWFA1Z5CAPn3R
    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

  5. 6Vs6TlIDFHlG3mA4
    6Vs6TlIDFHlG3mA4
    CkbgjRhIABOuONSR
    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

  6. Ovs5QQYS4H5Mldc2
    Ovs5QQYS4H5Mldc2
    OcJbEoYUIH2yVedE
    p1rJLQsNwZndaV5g
    • Carefully pry off the connection between the headphone jack and logic board.

  7. ky2MGU4ZJIfA5Qle
    ky2MGU4ZJIfA5Qle
    loNvOY6aEqfyja1H
    • Lift the first logic board off of the rest of the device.

  8. alMnXFkPNjktXI6K
    • Gently lift the second logic board from the rest of the device.

    • DO NOT force the board straight off as it could damage the ribbon cable!

  9. UQYIpSVXlLBjoJt3
    UQYIpSVXlLBjoJt3
    ISWLimHOnck1QDpk
    • Using tweezers, carefully pull off the connector shown.

  10. qYAPn4WmV4Cycvk5
    qYAPn4WmV4Cycvk5
    m1Q1dGCnGFw2Kgbh
    bsuIurQh4VpEFCVl
    • Remove the keypad buttons off the front cover of the phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jorge

Mitglied seit: 14/04/10

4 Reputation

0 Kommentare