Disassembling Nerf N-Strike Firestrike Blaster Casing

Geschrieben von: Hayes Kimball
  • Kommentare: 2
Disassembling Nerf N-Strike Firestrike Blaster Casing

Schwierigkeitsgrad

Very easy

Schritte

5

Zeitaufwand

5 - 10 Minuten

Einleitung

You will be walked through the steps to reveal the internal workings of the Firestrike. From here you will be able to replace any portion of the Firestrike. You will only need a #1 Phillips Screwdriver and your hands. This guide is quick and easy and can be completed anywhere.

  1. MJUqnvxeG3sA6fU6

    • Use a #1 Phillips screwdriver to remove the 10 -mm screw that secures the battery plate, then remove the battery cover using your hands.

    This should be step 1

    Samuel Garcia -

  2. u5drJAYnRpVdHIOJ
    u5drJAYnRpVdHIOJ
    Vk4r3ZH2GgmjWS5S

    • Slide out the two AAA batteries using your fingers.

    This should be step 2

    Samuel Garcia -

  3. OkPuTeEgOsYjfyRf

    • Remove the seven 10-mm black Phillips screws from the blaster casing with a #1 Phillips Screwdriver.

  4. addsNFJ3YDd1yXYS
    addsNFJ3YDd1yXYS
    1LSJjSBuPkktTtAu

    • Slowly pull apart the blaster casing, starting at the battery location.

    • Keep pulling apart slowly until it separates completely. Be cautious as to not send the internal components flying.

  5. XOaYlWsPJYk6d61O
    XOaYlWsPJYk6d61O
    GNcEIPyStNYvIeRI

    • For reassembly, ensure that the chrome nut gets put back in the proper location, signified by the red box.

    • For reassembly, ensure that all the parts are lined up correctly on the dowels, signified by the four orange boxes.

    • For reassembly, note the location of the springs as highlighted in the second photo.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Hayes Kimball

Mitglied seit: 19/04/15

742 Reputation

0 Kommentare