Einleitung
This guide will show you how to separate the body into the trigger frame and the bolt frame. This will allow you to access the solenoid and eyes.
Werkzeuge
-
-
Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.
-
-
-
Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline.
-
-
-
Use 1/8" allen wrench to loosen the screw inside the grip on the right side.
-
Slide the upper frame forward on the rails and remove the screw from the slot to separate the two halves of the body.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.