Einleitung

How to remove the screen.

  1. jebwdkg2B4F4IHpU
    jebwdkg2B4F4IHpU
    qOeyM5PJFlCBgVWo
    • Push open the latch and remove the battery.

  2. LI4GFkpWlRlL6tE5
    LI4GFkpWlRlL6tE5
    cLpMKLcJY2ECMPGm
    • Twist off the antenna.

    • Pop off the transparent cylinder.

  3. pxSnIZwNHfXV3PaI
    • Remove the five screws as shown.

  4. PmPCQv2yWnfgZQWP
    • Carefully pry the back plate off.

  5. vcMChtlwfCro3CCK
    vcMChtlwfCro3CCK
    VhjBu5aDwmkUhXs2
    • Carefully detach golden screen connector.

  6. MVJXIUYwUMiundF2
    MVJXIUYwUMiundF2
    Lk3CONrqLB6XZNOL
    • Pop out the logic board with spudger.

    • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

  7. 4YcCD411KL5MY5Ba
    4YcCD411KL5MY5Ba
    DyFlOPEPODEKZWDY
    • Place the logic board on a clean tray.

  8. SCuUoMUkWHmkKFDY
    SCuUoMUkWHmkKFDY
    4BSXq5oDOWuvuZn1
    • Remove the hinge on the phone.

    • Put pressure on the spring with the screwdriver to unhinge phone.

    • Make sure to pull the gold wire through, don't let it rip.

  9. 3fKfhyENELW65Wsp
    3fKfhyENELW65Wsp
    nieGMOLQI6ABhhPf
    DPHJMl3RU1ITBAAZ
    • Remove the four screws as shown

    • Use the spudger to pry it open, excessive force may be necessary.

  10. FGgMrHkwUcDYhuw6
    FGgMrHkwUcDYhuw6
    1XOhABCmgDlNcdoo
    tKLDFV6VBO1uKIXR
    • Remove the three screws that hold the big speaker

    • Caution: The wires are attached to the screen and should be removed with care.

  11. mCOZNfqFImkAiCkZ
    mCOZNfqFImkAiCkZ
    EcIqRSOCtl2WhKSk
    • Remove the three screws as shown.

    • Pull off the metal bracket.

  12. iuCFdtITGLNhkBq4
    iuCFdtITGLNhkBq4
    mVFyQWOMRm6tZ2OA
    BU6D3srB5KePxYML
    • Use the spudger to pop off the screen.

    • Pop off the Microphone/Speaker as well.

    • Place all of the components on a clean tray and clean environment.

Abschluss

To reassemble your device, follow these instructions in reverse order.

David

Mitglied seit: 20/04/10

25 Reputation

0 Kommentare