Disassembling Sanyo SCP-8100 Back Panel

Geschrieben von: Yemane
  • Kommentare: 0
Disassembling Sanyo SCP-8100 Back Panel

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

15 Minuten

Einleitung

  1. S5vfFsEA62G3AfiK
    S5vfFsEA62G3AfiK
    UYUarMiSkXbSYPOd
    4K52Z5EiIChXgiDU

    • Push and hold the button on the back toward the direction of the arrow to unlock the battery.

    • Lift and remove the battery from the back of the phone.

  2. J2etGTqBQcsXGitr
    J2etGTqBQcsXGitr
    Jw4Y4NPKa3vc3cit

    • Using a push pin, pull out the plug on the back, located under the antenna.

    • You may try to use a spudger or opening tool, however, you may damage the plug because those tools are too thick.

  3. QYCArKflBFWA2XNk

    • Unscrew the four 6mm long screws with a Tri-Wing Y1 screwdriver.

  4. UT4dxrr3MRRfqJv3
    UT4dxrr3MRRfqJv3
    FNG63gitrN1URoA3

    • Use a plastic opening tool to pry the back panel along the edges.

    • You may need to apply some force when prying.

  5. 5ECytCrnMm6xkQcY
    5ECytCrnMm6xkQcY
    iOWLPQQcmElKeTj5
    K6ugjb5TtRqBsZGD

    • While removing the back panel, take out the rubber cover on each side.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Yemane

Mitglied seit: 14/04/13

11 Reputation

0 Kommentare