Einleitung
This guide will explain how to take off the camera's exterior case.
Werkzeuge
-
-
Begin by placing the camera upside down and removing the three small center screws.
-
All screws are the same size and length and can be used interchangably.
-
-
-
Turn the camera on its side (Counterclockwise). Remove the two small screws on either side of the silver panel.
-
Turn the camera 180 degrees onto its other side and remove the two small screws on either side of the silver panel.
-
-
-
Locate the camera's tripod mount located on the bottom of the camera.
-
Carefully remove the camera's tripod mount and place it aside.
-
Be careful not to lose this piece.
-
Rotate the silver panel labeled 4x clockwise.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
