Disconnect the Battery

Geschrieben von: Holly Lowe
  • Kommentare: 2
Disconnect the Battery

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

Keine Schätzung

Einleitung

Use this guide to disconnect the battery in the Nook Tablet. It is important to disconnect power before working on the Nook's internal components.

  1. kAcWywTOyYMOPVq2

    • Flip the Nook over.

  2. ofqiDrHoLbXqMNAP
    ofqiDrHoLbXqMNAP
    GYLjQTksX2wfpEc3

    • Lift the flap that reads "Nook" to reveal the tape that is underneath. Remove the memory card if one is present.

    • Remove the tape covering the round holes to reveal two T5 Torx screws.

    • Remove the two T5 Torx screws securing the back cover.

    Remove stickers covering T5 screws and remove screws

    badbyz -

    Also, remove the mini SD card first or you may break it taking the back off.

    54pontiac -

  3. GgiGCdQEfPy4YH5Q
    GgiGCdQEfPy4YH5Q
    Pf1FM115ASlBemmI

    • Insert the flat end of a spudger between the front panel and the rear assembly.

    • Though these photos show a screwdriver, use a spudger or plastic opening tool in order to prevent damage to the device.

    • Use a spudger to lift the the back panel from the rest of the Nook.

  4. DE1CfPeOKaqUcbVO
    DE1CfPeOKaqUcbVO
    GHweUYOb4DoSQJdR

    • Slide the spudger around the edges of the Nook to loosen the back panel.

  5. TCLfPJgEQpIac6vg

    • Pull the back panel off the Nook.

  6. EZkGETRaEmS4XAMd
    EZkGETRaEmS4XAMd
    cUtTLB62hoWdwpvY

    • Lift up the foam pad at the corner of the battery to reveal the battery connector.

    • Use a spudger or plastic opening tool to disconnect the battery cable from the motherboard.

    • These photos show a screwdriver, but we recommend using a nonconductive tool like a spudger to prevent a potential short.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Holly Lowe

Mitglied seit: 26/09/12

238 Reputation

0 Kommentare