Einleitung

Cleaning your optical drive is standard maintenance especially if your movies wont play. Here is how you get to it and clean it properly.

  1. IGF5LNU6eXfW2v5f
    IGF5LNU6eXfW2v5f
    J4GOPGxQMKnm1IWU
    • Remove the four 5mm Phillips #1 screws that connect the black outer shell to the silver back of the device.

  2. ZTcpZSHGEmCOJqZE
    • Remove the two 5mm screws on the left and right side panels.

    • There is one screw on each side that secures the cover to the body of the device.

  3. SyRXUdFC4Kxj6QFb
    • Lift the black cover to a 45 degree angle from the rear of the device and pull the cover away entirely.

    • Check that the power cord is not preventing the device from opening or closing.

  4. dAnr1mEu2oxZBPqs
    dAnr1mEu2oxZBPqs
    JX6Ua136gpSiupIA
    • To access the optical lens, pull back the optical drive as shown in the pictures located on the two metal rails.

  5. QQCngaGdYOKTXT1P
    QQCngaGdYOKTXT1P
    MGNgyOOcfj2sVjdr
    • Clean the optical lens by rubbing gently with a microfiber cloth.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Caleigh Firth

Mitglied seit: 05/04/18

438 Reputation

0 Kommentare