Dynex DX-WBRDVD1 Top Cover Replacement

Geschrieben von: Caleigh Firth
  • Kommentare: 0
Dynex DX-WBRDVD1 Top Cover Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

1 Minute

Einleitung

This is the guide to crack into your device, almost every repair guide will need this completed first before being able to tear into the hardware below.

  1. IGF5LNU6eXfW2v5f
    IGF5LNU6eXfW2v5f
    J4GOPGxQMKnm1IWU

    • Remove the four 5mm Phillips #1 screws that connect the black outer shell to the silver back of the device.

  2. ZTcpZSHGEmCOJqZE

    • Remove the two 5mm screws on the left and right side panels.

    • There is one screw on each side that secures the cover to the body of the device.

  3. SyRXUdFC4Kxj6QFb

    • Lift the black cover to a 45 degree angle from the rear of the device and pull the cover away entirely.

    • Check that the power cord is not preventing the device from opening or closing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Caleigh Firth

Mitglied seit: 05/04/18

438 Reputation

0 Kommentare