Eatsmart ESBS-01 Battery Replacement

Geschrieben von: Elle Luo
  • Kommentare: 0
Eatsmart ESBS-01 Battery Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

2 - 5 Minuten

Einleitung

If your weight scale is showing the message LO on the display screen, this guide can help you to fix it. This step-by-step instruction teaches you how to replace the items on the device in order to make your device work again. You will need to prepare 4 AAA batteries in advance in order to complete this repair.

  1. wJq2XqPFKoLJM6aa
    wJq2XqPFKoLJM6aa
    SCPprsPQSYsWSUqr

    • The LO message on the screen indicates that your digital weight scale is running on low battery so you need to get the replacement battery.

    • This area is where the batteries located, top right corner of the scale.

  2. cyWvR1trDUqXj14v
    cyWvR1trDUqXj14v
    kGJlDltuT4vkXDr1

    • To open the battery compartment, use your finger to gentling push the tip to open the battery compartment.

  3. OoRNhmcd1b1ItUmE
    OoRNhmcd1b1ItUmE
    331j6MNtsKnawFu4

    • Remove the old batteries from the device by pushing the battery toward the wire side and gentling taking it out.

  4. pkC5B6XwL3ZiV2LP
    pkC5B6XwL3ZiV2LP
    I432bR6jfUOTqPFj

    • Insert the new batteries in the device.

    • Be aware to place the batteries in the right charge. The positive (+) and negative (-) signs are labeled inside the battery compartment. Place the flat side of the battery to the negative side and the little lip side of the battery to the positive side on the device.

  5. WWrEDM1kjXFCRtVJ
    WWrEDM1kjXFCRtVJ
    M3xLf22lQjMxiUV4
    Y1jR3BIAB3khoQFq

    • Put the cover of the compartment back. You successfully replaced the batteries.

    • You should now see the weight displaying on the screen after the replacement.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Elle Luo

Mitglied seit: 28/04/17

137 Reputation

0 Kommentare