Eco X Gear Gasket Replacement

Geschrieben von: James Lipsett
  • Kommentare: 0
Eco X Gear Gasket Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

20 Minuten

Einleitung

You will need a phillips head screw driver and needle nose pliers to complete this task. Before opening the device, ensure that there is no power to avoid damaging the electronics or harming yourself.

  1. rT1QeLQjV1tJV5kZ

    • Disconnect any power source and/or turn off device.

  2. MyF5D5ZsmO4YC6o2

    • Remove the 15 rubber plugs from the cavities using needle nose pliers.

  3. MFJihdcbkWrBRThH

    • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

  4. IwpPuAOGbvngpOAb

    • Carefully separate the two sections of the frame.

    • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

  5. RnWbBmVJIyZLEJqR

    • Inspect the gasket around the perimeter of the frame. Remove the gasket using your fingers or needle nose pliers.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

James Lipsett

Mitglied seit: 21/03/17

601 Reputation

0 Kommentare