Ecovacs DEEBOT D35 Side Brushes Replacement

Geschrieben von: Brian
  • Kommentare: 1
Ecovacs DEEBOT D35 Side Brushes Replacement

Schwierigkeitsgrad

Very easy

Schritte

3

Zeitaufwand

30 Sekunden - 1 Minute

Einleitung

The spinning brushes are located on the backside of the DEEBOT D35 on the front right and left edge. These brushes pull dirt to the vacuum where it is suctioned up.

  1. HROme1QkGXUXeeWu

    • Roll the Deebot over on a flat surface. The brushes will be located on the front with bright yellow connectors.

  2. evmHBWQO6TPmO3r5

    • Place a plastic opening tool under the lip of the brush head.

  3. HqKZOlHtwWYSOPO6

    • Gently pry up with the opening tool so that the brush comes out completely.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Brian

Mitglied seit: 15/02/17

475 Reputation

Ein Kommentar

Where can I get a replacement part for the little gray piece on step 3?

Kristy J. Heisser -