Einleitung

If the tablet has out of focus pictures or doesn't take them at all, this guide will show you how to replace the camera. Tools that are needed will include a Phillips Head screwdriver with a #00 3mm screw, spudger, plastic opening tool, as well as a pair of tweezers to properly remove the broken equipment.

  1. WhleoGowxyY1Q3MM
    • Use a Phillips 00 bit to remove two 3mm screws from the bottom of the tablet.

  2. ZNfLNNxkUy6kedOu
    ZNfLNNxkUy6kedOu
    qQGJLySDD6GpIGWG
    NJQP25HRPc2Slo1W
    • Insert the nylon spudger into the bottom of the tablet, and gently slide it up the side.

    • Pull apart the two sides of the tablet, exposing the circuit board, battery, and other components of the tablet.

  3. OrNgV5dsmA1W1KBP
    OrNgV5dsmA1W1KBP
    1jSTET1ATuqbwcVX
    • Using the spudger to raise the zero insertion force (ZIF) connector to freely release the ribbon.

  4. WJCxhA2pbKaxcMvu
    • Using tweezers gently pull the ribbon off of the enclosure.

    • Remove the camera.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Micalle Marin

Mitglied seit: 15/09/16

267 Reputation

0 Kommentare