Einleitung
Disassemble the engine brake (allows the operator to slow or stop the engine) in order to replace the return spring, bolts, brackets, or cable.
Werkzeuge
-
-
Remove the return spring by using needle nose pliers, a screwdriver, or other device. I removed the spring by the end of the front bracket (away from the mower handle). Lift up and away from the bracket, and the spring should come out.
-
Remove the two bolts using a 7/16 socket.
-
-
-
Push the metal tab closest to the black wire down
-
While pushing the tab down, pull the black wire out of the clip.
-
Disassembly is complete!
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
