Einleitung
-
-
With the bottom of the projector facing you, use a Phillips #00 screwdriver to remove the seven screws.
-
-
-
Use a Phillips #00 screwdriver to remove one screw on the backside of the projector.
-
Slide the panel off.
-
-
-
Lift the top frame from the backside of the projector, with care not to damage any connections.
-
Disconnect the two cables from the motherboard.
-
-
-
Use a Phillips #00 screwdriver to remove one screw.
-
Lift the fan and its mount up and out of the projector.
-
-
-
Use a Phillips #00 screwdriver to remove the two screws securing the fan to its housing, then gently pull them apart to separate each piece.
-
Abschluss
To reassemble your device, follow these instructions in reverse order using the new exhaust fan.
