Einleitung

To keep your device protected, make sure that the back panel of your device is crack free. If your radar's back panel has a really bad crack, follow these steps to replace it.

  1. MlYNlfLwIqFInckN
    • Remove the three 1.2 mm Phillips #1 screws on the back of the device.

  2. q3KytcKK2BDUo1Uy
    • Pry off the back panel of the radar using the nylon spudger.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kennedy Morales

Mitglied seit: 20/10/17

655 Reputation

0 Kommentare